Rabu, Agustus 19, 2009

Ms. Windows Server 2003 R2: Disk Problem

Konfigurasi:
SAS Controller --- Disk Enclosure --- SAS / SATA Disk

Tanda utama:
Di aplikasi disk management harddisk yang bermasalah keterangannya adalah Unknown - Not Initialized.

Berikut beberapa pesan kesalahannya:

Event ID: 57
Source: dmio
Category: Disk
Type : Warning
Description: The System failed to flush data to the transaction log. Corruption may occur.

Event ID: 50
Source: Ntfs
Category: none
Type : Warning
Description: {Delayed write failed} Windows was unable to save all the data for the file. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.

Event ID: 30
Source: dmio
Category: none
Type : Information
Description: dmio: Harddisk2 write error at block 6160447: status 0xc000000e.

Event ID: 51
Source: Disk
Category: None
Type : Warning
Description: An error was detected on device \Device\Harddisk2\DR2 during a paging operation.

Event ID: 37
Source: dmio
Category: None
Type : Warning
Description: dmio: Disk Harddisk2 block 6160447 (mountpoint F:): Uncorrectable write error.


Solusinya?
Kemungkinan bisa ini. Tapi belum di coba.

1. Bad cabling / bad Connectors (to hdd unit

2. Power issues ("Old" MB, unstable power supply, cheap power supply)

3. Failing disk (unlikely but possible)

4. Driver issue. If it's SATAII disk you may try running in SATAI compatibilty mode (jumper) or in IDE mode (BIOS setting)

5. ..........?

Tidak ada komentar: